Additive manufacturing – Umbrella term for all processes that build a part by adding material. In everyday use it means the same as 3D printing.
Bridging – A horizontal span printed freely between two supporting points.
Build volume – The maximum space inside the printer. It limits the size of a part made in one piece.
CAD – Software for designing 3D models.
FDM / FFF – Fused deposition modelling: plastic filament is melted and laid down in lines.
Filament – The plastic wire on a spool, the raw material for FDM printing.
G-code – The machine commands the slicer generates for the printer.
Infill – The lattice pattern inside a part, given as a percentage.
Layer height – The thickness of a single printed layer, typically 0.08 to 0.28 mm.
Multicolour printing – Printing one part from several filaments, in our case through an automatic material system.
Nozzle – The opening the molten plastic leaves through. 0.4 mm is standard, 0.2 mm for fine detail.
Overhang – An area that projects beyond the layer below. From about 45° it needs supports.
Perimeters (wall lines) – The outer lines of a part. More of them make it stronger.
Rapid prototyping – Making samples quickly in order to check a design early.
SLA – A process in which liquid resin is cured with light.
Slicer – The program that cuts a 3D model into layers and calculates the print paths.
SLS – A process in which plastic powder is fused by a laser.
STEP – An exchange format for exact design data.
STL – The most common 3D printing file format. It describes the surface as a triangle mesh.
Support – Auxiliary material under overhangs that is removed after printing.
Threaded insert – A brass sleeve with an internal thread that is heat-set into the printed part.
Tolerance – The permitted deviation from the nominal dimension.
Warping – Corners lifting as the plastic shrinks while cooling.
3MF – A modern file format that stores units, colours and settings along with the shape.