STL, 3MF or STEP? Preparing files for 3D printing

Updated:

Which file formats work for 3D printing, how to export cleanly, and what you can do if you have no file at all.

The three main formats

FormatWhat it holdsWhen to use it
STLa surface made of triangles, no units, no colourthe standard, accepted everywhere
3MFgeometry plus units, colours, multiple partsmodern successor to STL, ideal for multicolour prints
STEPexact design geometrybest when something still needs adjusting

We also accept OBJ and other formats. If you can choose: STEP for technical parts, 3MF for multicolour objects, and STL always works.

Checklist before uploading

  • Check the units. STL has none. A part exported in inches arrives 25.4 times too small. If in doubt, give one reference dimension.
  • Export resolution. Too coarse and curves turn faceted. A chord deviation of about 0.05 mm is a good value.
  • Closed solid. The model has to be watertight, with no holes or open faces.
  • One part per file, or a clearly named assembly.
  • Wall thickness. Below 0.8 mm things get critical.

Where do I get a model?

  • Design it yourself: Tinkercad to get started; Fusion, Onshape or FreeCAD for technical parts.
  • Download it: Platforms such as Printables, MakerWorld or Thingiverse offer millions of ready-made models. Check the licence, especially for commercial use.
  • Have it made: From a photo, sketch and dimensions, or from the original part.

If you have no file

To rebuild a part we need:

  1. Photos from all sides, ideally with a ruler or calliper in the picture
  2. The key dimensions: outer size, hole spacing, diameters
  3. Where the part sits and what it has to withstand

Sending the broken original by post gives the most accurate template.

FAQ

Can I turn a photo into a 3D model?

For figures and organic shapes, 3D scanning and AI tools now work reasonably well. For dimensionally accurate technical parts, modelling from measurements is more reliable.

May I have any model from the internet printed?

Only within its licence. Many models are free for private use but not for resale. Protected brands and designs must not be copied without permission.

Straight to the price

Upload a file, pick a material, see the price. From 1 piece, dispatched in 1 working day or picked up in Berlin.

Get an instant price

Upload a part and see the price

Upload your file and see the price at once. Without a file, a photo with dimensions is enough.

Get an instant price